Home › STEERING › POWER STEERING › POWER STEERING SYSTEM (for 1UR-FE)

DTC    U0073    Control Module Communication Bus Off

for Preparation Click here


DESCRIPTION

The power steering ECU receives signals from the ECM, steering angle sensor and skid control ECU via the CAN communication system.

DTC Code
DTC Detection Condition
Trouble Area
U0073
Control module communication bus is off.
  1. Steering angle sensor (Spiral cable sub-assembly)
  2. Engine control system
  3. Brake control system
  4. CAN communication system
  5. Power steering ECU assembly

INSPECTION PROCEDURE

1.CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)