FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION |
| 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY |
![]() |
Install the front seat inner belt with the nut.
Driver Side:
Connect the 2 connectors and attach the 4 clamps.
Passenger Side:
Connect the connector and attach the clamp.
| 2. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat) |
![]() |
Attach the 3 claws in the order shown in the illustration, and install the cushion shield.
Install the screw.
| 3. INSTALL FRONT SEAT ASSEMBLY (for Power Seat) |
Install the front seat (Click here).
| 4. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat) |
Install the front seat (Click here).
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).