Home › RESTRAINTS › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat)

FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat) > INSTALLATION

for Preparation Click here



1. INSTALL CENTER FRONT SEAT BELT ASSEMBLY RH


B165813
  1. Align the seat frame's claws with the seat belt retractor positioning holes.

  1. Install the seat belt with the nut and bolt.

    HINT:
    First install the bolt, and then install the nut.

    Torque:
    for bolt:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
    for nut:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. INSTALL FRONT SEAT HEADREST SUPPORT


B165593
  1. Attach the 4 claws to install the 2 headrest supports.



3. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY


    B166550
  1. RH Side:
    Connect the cable to the center seatback frame inner side.



    B166551
  1. LH Side:
    Connect the cable to the center seatback frame inner side.



    B165588
  1. Attach the 21 claws to install the board.

  1. Install the screw.



    B165587
  1. Install the 6 screws.



4. INSTALL SEAT FASTENER COVER


B165586
  1. Attach the 6 claws to install the 2 covers.



5. INSTALL CENTER FRONT SEAT ARMREST COVER


B165585
  1. Install the armrest cover with the 2 screws.



6. INSTALL FRONT SEAT TRAY


B165584
  1. Attach the 5 clips to install the tray.



7. INSTALL RECLINING REMOTE CONTROL BEZEL


B165583
  1. Attach the 2 clips and claw to install the bezel.



8. INSTALL LOWER FRONT SEAT SHOULDER BELT COVER


B165582
  1. Using a T30 "TORX" socket, install the shoulder belt cover with the 2 bolts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }



9. INSTALL UPPER REAR SEATBACK LOCK BEZEL


B165581
  1. Connect the seat belt to the shoulder belt cover.

  1. Attach the 4 claws to install the lock bezel.



10. INSTALL FRONT SEAT SHOULDER BELT COVER


B165580
  1. Using a T10 "TORX" socket, install the shoulder belt cover with the 2 screws.

    Torque:
    0.9 N*m{ 9 kgf*cm , 8 in.*lbf }



11. INSTALL FRONT SEAT HEADREST ASSEMBLY


12. INSTALL CENTER SEATBACK ASSEMBLY


    B165575
  1. Install the center seatback.

  1. RH Side:
    Using a T55 "TORX" socket, install the 2 bolts.

    Torque:
    55 N*m{ 561 kgf*cm , 41 ft.*lbf }

  1. LH Side:
    Using a T40 "TORX" socket, install the 2 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B165574
  1. Install the 2 wire harness clamps to the center seatback frame.



13. CONNECT CENTER FRONT SEAT BELT ASSEMBLY RH


B165812
  1. Install the belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



14. INSTALL CENTER SEAT CUSHION SHIELD RH


B165568
  1. Attach the 7 claws and 3 clips to install the cushion shield.

  1. Using a T30 "TORX" socket, install the bolt.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



15. INSTALL CENTER SEAT CUSHION SHIELD LH


B165567
  1. Attach the 7 claws and 2 clips to install the cushion shield.

  1. Using a T30 "TORX" socket, install the bolt.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



16. INSTALL CENTER FRONT SEAT ASSEMBLY
  1. Install the front seat .



17. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
  1. Install the front seat (Click here).



18. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Install the front seat (Click here).