REAR SEAT OUTER BELT ASSEMBLY (for CrewMax) > REMOVAL |
| 1. REMOVE REAR SEAT ASSEMBLY |
Remove the rear seat (Click here).
| 2. REMOVE BACK PANEL TRIM RH |
![]() |
Remove the package holder net hook.
Detach the 8 clips and remove the back panel trim.
| 3. REMOVE BACK PANEL TRIM LH |
Remove the package holder net hook.
Detach the 8 clips and remove the back panel trim.

| 4. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Detach the 6 claws and 2 clips, and remove the rear door scuff plate.
| 5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP |
Partially remove the front door opening trim weatherstrip so that the lower quarter trim panel and front quarter trim panel can be removed.
| 6. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY |
![]() |
Detach the 2 claws and remove the cover.
![]() |
Remove the bolt and seat belt anchor.
![]() |
for LH Side:
Detach the 4 clips and remove the lower quarter trim panel.
![]() |
for RH Side:
Detach the 3 clips and remove the lower quarter trim panel.
| 7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY |
![]() |
Using a screwdriver, detach the claw and remove the cover.
![]() |
Remove the 2 bolts.
Detach the 4 clips.
Pass the rear seat outer belt floor anchor through the quarter trim panel, and remove the front quarter trim panel.
| 8. REMOVE REAR SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the nut and disconnect the seat belt's shoulder anchor.
![]() |
Remove the 2 bolts and seat belt.
| 9. REMOVE REAR SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY |
![]() |
Remove the 2 bolts and adjuster.