Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH (for Power Seat)

FRONT POWER SEAT LUMBAR SWITCH (for Power Seat) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. INSTALL FRONT POWER SEAT LUMBAR SWITCH LH


B166946
  1. Install the switch with the 2 screws.



2. INSTALL FRONT SEAT CUSHION SHIELD LH


B166945
  1. Connect the switch connectors.

  1. Attach the 2 claws to install the cushion shield.

  1. Install the 3 screws.



    B166944E02
  1. Install the 2 screws.

  1. Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with new hog rings.



3. INSTALL RECLINING POWER SEAT SWITCH KNOB LH


B167192
  1. Attach the 2 claws to install the knob.



4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH


B167193
  1. Attach the 2 claws to install the knob.



5. INSTALL FRONT SEAT ASSEMBLY LH
  1. Install the front seat (Click here).