FRONT SEATBACK HEATER (w/ Seat Heater System or Climate Control Seat System) > INSTALLATION |
| 1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH |
w/ Seat Heater System:
Set the seatback heater with the name stamp side facing the seatback cover.
Install the seatback heater with new tack pins.

w/ Climate Control Seat System:
Set the seatback heater with the name stamp side facing the seatback cover.
Install the seatback heater with new tack pins.

| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER LH |
![]() |
Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
![]() |
Connect the seatback cover bracket to the seatback pad.
![]() |
Install the seatback cover wires.
Using hog ring pliers, install new hog rings to the seatback pad.
| 3. INSTALL FRONT SEATBACK COVER WITH PAD LH |
Install the seatback cover with pad to the seatback frame.
![]() |
Using hog ring pliers, install new hog rings to the seat frame.
![]() |
Attach the 4 claws to install the 2 headrest supports.
![]() |
Install the seatback cover bracket to the seat frame with the nut.
Install the seatback cover wires.
![]() |
Using hog ring pliers, install new hog rings to the seat frame.
![]() |
Attach the hook.
![]() |
Attach the wire harness clamp.
Connect the seat heater connector.
| 4. INSTALL INNER FRONT SEAT CUSHION SHIELD LH |
![]() |
Attach the 2 claws and clip to install the cushion shield.
Install the screw.
| 5. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
![]() |
Install the front seat inner belt with the nut.
Driver Side:
Connect the 2 connectors and attach the 4 clamps.
Passenger Side:
Connect the connector and attach the clamp.
| 6. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Connect the switch connectors.
Attach the 2 claws to install the cushion shield.
Install the 3 screws.
![]() |
Install the 2 screws.
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with new hog rings.
| 7. INSTALL RECLINING POWER SEAT SWITCH KNOB LH |
![]() |
Attach the 2 claws to install the knob.
| 8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH |
![]() |
Attach the 2 claws to install the knob.
| 9. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat (Click here).