ENGINE UNIT > REMOVAL |
| 1. REMOVE ENGINE WIRE |
| 2. REMOVE NO. 1 WATER BY-PASS PIPE |
![]() |
Disconnect the 2 water by-pass pipe hoses and remove the pipe.
| 3. REMOVE HEATER WATER PIPE SUB-ASSEMBLY |
![]() |
Disconnect the hose and remove the 2 bolts and heater water pipe.
| 4. REMOVE EMISSION CONTROL VALVE SET |
![]() |
Remove the 3 nuts and emission control valve set.
| 5. REMOVE NO. 2 EMISSION CONTROL VALVE SET |
![]() |
Remove the 3 nuts and No. 2 emission control valve set.
| 6. REMOVE WIRING HARNESS CLAMP BRACKET |
![]() |
Remove the 7 bolts and 7 wiring harness clamp brackets.
| *A | for Bank 2 |
| *B | for Bank 1 |
| 7. REMOVE IGNITION COIL ASSEMBLY |
![]() |
Remove the 6 bolts and 6 ignition coils.
| 8. REMOVE FUEL PIPE SUB-ASSEMBLY |
![]() |
Disconnect the 2 fuel pipes (Click here).
Remove the 2 bolts and No. 1 fuel pipe and No. 2 fuel pipe.
| 9. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY |
![]() |
Disconnect the 6 fuel injector connectors.
Remove the 4 bolts and fuel delivery pipe together with the 6 fuel injectors.
| 10. REMOVE FUEL INJECTOR ASSEMBLY |
![]() |
Remove the 6 fuel injectors from the fuel delivery pipe.
| *1 | Fuel Delivery Pipe |
| *2 | Fuel Injector |
Remove the O-ring and injector vibration insulator from each fuel injector.
| 11. REMOVE INTAKE MANIFOLD |
![]() |
Remove the 4 nuts, 6 bolts and 2 gaskets.
| 12. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY |
![]() |
Disconnect the 2 hoses.
Remove the 3 bolts and water by-pass pipe.
| 13. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY |
![]() |
Remove the bolt and No. 1 idler pulley.
| 14. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY |
![]() |
for Separate Type:
Remove the 2 bolts, 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates.
| *A | LH |
| *B | RH |
for Integrated Type:
Remove the 2 bolts and 2 No. 2 idler pulleys.
| 15. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY |
![]() |
Remove the 5 bolts and V-ribbed belt tensioner.
| 16. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE |
![]() |
Remove the dipstick.
Remove the bolt and dipstick guide.
Remove the O-ring from the dipstick guide.
| 17. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH |
![]() |
Remove the 3 bolts and front No. 1 engine mounting bracket LH.
| 18. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH |
![]() |
Remove the 4 bolts and front No. 1 engine mounting bracket RH.