With ignition switch ON, when IG voltage of less than 10 V continues for 20 minutes or more, or IG voltage of over 16 V continues for 0.5 seconds or more
Battery
Charging system
Tire pressure warning ECU
INSPECTION PROCEDURE
If DTC C2178/78 is output, inspect the battery and charging system for 1GR-FE (Click here), 1UR-FE (Click here), 3UR-FE (Click here), or 3UR-FBE (Click here). If the battery and charging system are normal, perform the "ECU Power Source Circuit" inspection procedure (Click here).