FRONT DOOR (for Regular Cab) > ADJUSTMENT |

| 1. ADJUST FRONT DOOR |
![]() |
Disconnect the cable from the negative (-) battery terminal.
Using SST, loosen the body's hinge bolts and adjust the door's position.
Using SST, tighten the body's hinge bolts after the adjustment.
Loosen the door's hinge bolts and adjust the door's position.
Tighten the door's hinge bolts after the adjustment.
![]() |
Adjust the striker position by slightly loosening the striker mounting screws with a T40 "TORX" socket and hitting the striker with a plastic-faced hammer.
Using a T40 "TORX" socket, tighten the striker mounting screws after the adjustment.
Connect the cable to the negative (-) battery terminal.
Inspect the SRS warning light (Click here).