Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY


B165743E01
  1. Set the bracket's aligning protrusion labeled A into the floor's hole.

  1. Install the amplifier with the 3 bolts.

    HINT:
    Tighten the bolts in the order shown in the illustration.

  1. Connect the 3 connectors.



2. INSTALL AUDIO AMPLIFIER COVER


B168143
  1. Set the cover on the stereo amplifier assembly.

  1. Attach the 3 clips.



3. INSTALL FRONT SEAT ASSEMBLY RH
  1. for Manual Seat:
    Install the front seat RH (Click here).

  1. for Power Seat:
    Install the front seat RH (Click here).



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL