TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM > SYSTEM DESCRIPTION |
| DRIVING MODE SWITCHING PATTERN |

| 2WD TO 4WD HIGH SWITCHING CONTROL (Pattern A) |
| 1.CHANGE 4WD CONTROL SWITCH FROM 2WD TO 4H |
| |||||
| 2.2WD-4WD TRANSFER SHIFT ACTUATOR MOTOR IS OPERATED |

Vehicle speed judgment.
2WD to 4WD HIGH switching vehicle speed limit violation control
| Control |
|
| Release of Control | 4WD control switch: 2WD |
| |||||
| 3.4WD DETECTION SWITCH IS TURNED ON |
| Condition | Proceed to |
| After 4WD control switch operation, detection switch turns ON within 10 seconds | A |
| After 4WD control switch operation, detection switch does not turn ON even after 10 seconds have passed | B |
|
| ||||
| |||||
| 4.A.D.D. ACTUATOR MOTOR IS OPERATED |
| Control |
|
| Release of Control |
|
| |||||
| 5.A.D.D. ACTUATOR IS LOCKED (A.D.D. DETECTION SWITCH IS TURNED ON) |
| |||||
| 6.4HI INDICATOR LIGHT COMES ON |
The 4HI indicator light comes on when the 2WD to 4WD HIGH switch is complete.
| Control |
|
| Release of Control | 4WD control switch: Changed to position other than 4L |
|
| ||||
|---|---|---|---|---|---|
| 7.4WD HIGH TO 2WD RETURN CONTROL IS PERFORMED |
4WD HIGH to 2WD return control
| Control |
|
| Release of Control | When 2WD switch completed |
|
| ||||
|---|---|---|---|---|---|
| 4WD HIGH TO 2WD SWITCHING CONTROL (Pattern B) |
| 1.CHANGE 4WD CONTROL SWITCH FROM 4H TO 2WD |
| |||||
| 2.2WD-4WD TRANSFER SHIFT ACTUATOR MOTOR IS OPERATED |
Control is possible when driving at less than 100 km/h (62 mph).
| Control |
|
| Release of Control | 4WD control switch: 4H |
| |||||
| 3.4WD DETECTION SWITCH IS TURNED OFF |
| |||||
| 4.A.D.D. ACTUATOR BECOMES FREE (A.D.D. DETECTION SWITCH IS TURNED OFF) |
| |||||
| 5.4HI INDICATOR LIGHT TURNS OFF |
The 4HI indicator light turns off when the 4WD HIGH to 2WD switch is complete.
| Control |
|
| Release of Control | 4WD control switch: Changed to position other than 4L |
|
| ||||
|---|---|---|---|---|---|
| 4WD HIGH TO 4WD LOW SWITCHING CONTROL (Pattern C) |
| 1.CHANGE 4WD CONTROL SWITCH FROM 4H TO 4L |
| |||||
| 2.HIGH-LOW TRANSFER SHIFT ACTUATOR MOTOR IS OPERATED |
The high-low transfer shift actuator motor operates when all of the following conditions are met: 1) the vehicle speed is less than 5 km/h (3 mph); 2) the shift lever is on N.
| Control |
|
| Release of Control | Vehicle speed is less than 5 km/h (3 mph) and shift lever is on N (after release of control, warning buzzer stops and 4LO indicator light blinks at 0.5 second intervals until 4WD LOW switch completion) |
| Control |
| |
| Release of Control | Vehicle speed is less than 5 km/h (3 mph) and shift lever is on N (after release of control, warning buzzer stops and 4LO indicator light blinks at 0.5 second intervals until 4WD LOW switch completion) | 4WD control switch is changed to 4H or 2WD (switching operation occurs depending on switch position) |
| |||||
| 3.ACTUATOR LOW IS DETECTED |
| Condition | Proceed to |
| After 4WD control switch operation, ACTUATOR LOW detection occurs within 3 seconds | A |
| After 4WD control switch operation, ACTUATOR LOW detection does not occur even after 3 seconds have passed | B |
|
| ||||
| |||||
| 4.4LO INDICATOR LIGHT TURNS ON |
The 4LO indicator light turns on when the 4WD HIGH to 4WD LOW switch is complete.
|
| ||||
|---|---|---|---|---|---|
| 5.4WD LOW TO 4WD HIGH RETURN CONTROL IS PERFORMED |
4WD LOW to 4WD HIGH return control
| Control |
|
| Release of Control | When 4WD HIGH switch completed |
|
| ||||
|---|---|---|---|---|---|
| 4WD LOW TO 4WD HIGH SWITCHING CONTROL (Pattern D) |
| 1.CHANGE 4WD CONTROL SWITCH FROM 4L TO 4H |
| |||||
| 2.HIGH-LOW TRANSFER SHIFT ACTUATOR MOTOR IS OPERATED |
The high-low transfer shift actuator motor operates when all of the following conditions are met: 1) the vehicle speed is less than 5 km/h (3 mph); 2) the shift lever is on N.
| Control |
|
| Release of Control | Vehicle speed is less than 5 km/h (3 mph) and shift lever is on N (after release of control, warning buzzer stops and 4LO indicator light blinks at 0.5 second intervals until 4WD HIGH switch completion) |
| Control |
| |
| Release of Control | Vehicle speed is less than 5 km/h (3 mph) and shift lever is on N (after release of control, warning buzzer stops and 4LO indicator light blinks at 0.5 second intervals until 4WD HIGH switch completion) | 4WD control switch is changed to 4L (switching operation occurs depending on switch position) |
| |||||
| 3.ACTUATOR HIGH IS DETECTED |
| Condition | Proceed to |
| After 4WD control switch operation, ACTUATOR HIGH detection occurs within 3 seconds | A |
| After 4WD control switch operation, ACTUATOR HIGH detection does not occur even after 3 seconds have passed | B |
|
| ||||
| |||||
| 4.4HI INDICATOR LIGHT ILLUMINATES |
The 4HI indicator light illuminates when the 4WD LOW to 4WD HIGH switch is complete.
|
| ||||
|---|---|---|---|---|---|
| 5.4WD HIGH TO 4WD LOW RETURN CONTROL IS PERFORMED |
4WD HIGH to 4WD LOW return control
| Control |
|
| Release of Control |
|
|
| ||||
|---|---|---|---|---|---|
| 4WD LOW TO 2WD SWITCHING CONTROL (Pattern E) |
| INDICATOR LIGHT |
4HI Indicator Light
| Indicator Condition | Vehicle Condition | Details [Terminal Name: Switch Condition] |
| Illuminates | 4WD HIGH |
|
| During 4WD HIGH to 2WD switching | While 2WD-4WD transfer shift actuator and A.D.D. actuator are switching, within 3 seconds of operation of 4WD control switch (4H to 2WD) | |
| Does not illuminate | 2WD |
|
| During 2WD to 4WD HIGH switching | While 2WD-4WD transfer shift actuator and A.D.D. actuator are switching, within 3 seconds of operation of 4WD control switch (2WD to 4H) | |
| 4WD LOW |
| |
| During 4WD LOW to 4WD HIGH or 4WD LOW to 2WD switching |
| |
| Blinks (ON: 0.5 seconds, OFF: 0.5 seconds) | During 2WD to 4WD HIGH or 4WD HIGH to 2WD switching | While 2WD-4WD transfer shift actuator and A.D.D. actuator are switching, from 3 seconds or more after operation of 4WD control switch (2WD to 4H or 4H to 2WD) to switch completion |
| During 4WD LOW to 2WD return control | ||
| During 4WD LOW to 2WD switching | After change of 4WD control switch from 4L to 2WD, from high-low transfer shift actuator switch completion until 2WD-4WD transfer shift actuator and A.D.D. actuator switch completion | |
| When ignition switch is ON and 4WD control switch is between 2WD and 4H, or 4H and 4L | ||
| Blinks (ON: 0.5 seconds, OFF: 0.5 seconds) Warning buzzer sounds (ON: 0.5 seconds OFF: 0.5 seconds) | During 2WD to 4WD HIGH or 4WD HIGH to 2WD switching control violation |
|
| During A.D.D. actuator switching violation | During A.D.D. actuator switching, there is difference in rotation of front wheels and rear wheels or front left and right wheel | |
| Blinks (ON: 0.2 seconds, OFF: 0.2 seconds) | During malfunction |
|
| From 2WD to 4WD return control switching completion until 4WD control switch is changed to 2WD | ||
4LO Indicator Light
| Indicator Condition | Vehicle Condition | Details [Terminal Name: Switch Condition] |
| Illuminates | 4WD LOW |
|
| During 4WD LOW to 4WD HIGH switching | While High-Low transfer shift actuator is switching, within 3 seconds of operation of 4WD control switch (4L to 4H) | |
| Does not illuminate | 2WD |
|
| During 2WD to 4WD HIGH switching | ||
| 4WD HIGH |
| |
| During 4WD HIGH to 2WD switching | ||
| During 4WD HIGH to 4WD LOW switching | While high-low transfer shift actuator is switching, within 3 seconds of operation of 4WD control switch (4H to 4L) | |
| Blinks (ON: 0.5 seconds, OFF: 0.5 seconds) | During 4WD LOW to 4WD HIGH, or 4WD HIGH to 4WD LOW switching | While High-Low transfer shift actuator is switching, from 3 seconds or more after operation of 4WD control switch (4L to 4H or 4H to 4L) to switch completion |
| ||
| When ignition switch is ON and 4WD control switch is between 2WD and 4H, or 4H and 4L | ||
| Blinks (ON: 0.5 seconds, OFF: 0.5 seconds) Warning buzzer sounds (ON: 0.5 seconds OFF: 0.5 seconds) | During 4WD LOW to 4WD HIGH or 4WD LOW to 2WD switching control violation |
|
| When 2WD to 4WD HIGH switching is not completed, from when 4WD control switch is accidentally changed to 4L, until 4WD control switch is changed to 4H or 2WD | ||
| Blinks (ON: 0.2 seconds, OFF: 0.2 seconds) | During malfunction |
|
| ||
