Home › BODY ELECTRICAL › AUDIO / VISUAL › TELEVISION DISPLAY

TELEVISION DISPLAY > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE ROOM NO. 1 LIGHT ASSEMBLY


B169721
  1. Detach the 4 clips and remove the light.



4. REMOVE TELEVISION DISPLAY ASSEMBLY


B169720
  1. Disconnect the connector.

  1. Remove the 4 bolts.

  1. Detach the 2 clips and 2 claws, and remove the television display.



5. REMOVE ROOF HEADLINING ASSEMBLY (for CrewMax)
  1. Remove the roof headlining (Click here).



6. REMOVE TELEVISION DISPLAY BRACKET


B169719E03
  1. Remove the 4 bolts.

  1. Detach the clip and 2 claws, and remove the bracket.