Home › ENGINE ยท 1UR-FE › EMISSION CONTROL › EGR COOLER

EGR COOLER > REMOVAL

for Preparation Click here



1. REMOVE INTAKE MANIFOLD ASSEMBLY
  1. Remove the intake manifold (Click here).



2. REMOVE NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY


    A214288
  1. Disconnect the No. 4 water by-pass hose.

  1. Disconnect the hose and remove the 2 bolts and No. 3 water by-pass pipe.



3. DISCONNECT NO. 8 WATER BY-PASS HOSE


    A214290
  1. Disconnect the No. 8 water by-pass hose.



4. DISCONNECT NO. 11 WATER BY-PASS HOSE


    A214292
  1. Disconnect the No. 11 water by-pass hose.



5. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY


    A214293
  1. Remove the 4 nuts and EGR pipe.

  1. Remove the 2 gaskets.



6. REMOVE EGR COOLER ASSEMBLY


    A214294
  1. Remove the 2 bolts and EGR cooler.



7. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY


    A214296
  1. Remove the 2 bolts, No. 2 EGR pipe and gasket.

    NOTICE:
    Be careful not to damage the installation surface of the gaskets.