Home › BODY ELECTRICAL › AUDIO / VISUAL › MULTI-MEDIA INTERFACE ECU

MULTI-MEDIA INTERFACE ECU > INSTALLATION

for Preparation Click here



1. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A


    B229218
  1. Install the multi-display controller bracket A with the 2 bolts.

    Torque:
    2.0 N*m{ 20 kgf*cm , 17 in.*lbf }



2. INSTALL MULTI-MEDIA INTERFACE ECU


    B229217
  1. Connect the connector.

  1. Install the multi-media interface ECU with the nut.

    Torque:
    8.0 N*m{ 81 kgf*cm , 70 in.*lbf }



3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
  1. for Column Shift Type:
    Install the instrument panel (Click here).

  1. for Floor Shift Type:
    Install the instrument panel (Click here).



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL