Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > CD/DVD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


2.CHECK DISC


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      OK:
      Malfunction disappears.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.



NG
Go to step 3
OK

END (DISC IS DIRTY) 

3.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with a known good one and check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END (DISC IS DEFECTIVE) 

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Check that the radio and display receiver assembly is properly installed
    Result 
    Result
    Proceed to
    OK (for Column Shift Type)
    A
    OK (for Floor Shift Type)
    B
    NG (for Column Shift Type)
    C
    NG (for Floor Shift Type)
    C



B
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)

C
REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)

D
REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)