- NOTICE:
- Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components (Click here).
- Perform Reset Memory (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (Click here).
- Perform Registration (VIN registration) when replacing the ECM (Click here).
- HINT:
- RESET MEMORY cannot be completed by only removing the battery.
- CAUTION:
- Observe the following items for safety reasons:
- Read its instruction books before using the Techstream.
- Prevent the Techstream cable from being caught on the pedals, shift lever and steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One person drives the vehicle, and the other operates the Techstream.