NAVIGATION SYSTEM > Voice is not Recognized |
| 1.CHECK CONDITION |
Check if the system voice recognition success rate is low when recognizing a particular voice.
| Result | Proceed to |
| System voice recognition success rate is low with any voice | A |
| System voice recognition success rate is low only for a particular voice | B |
|
| ||||
| A | |
| 2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK) |
![]() |
Enter the "Microphone Check" screen. [Refer to Check Mic&Voice Recognition in Operation Check (Click here)]
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
| Result | Proceed to |
| OK (for Column Shift Type) | A |
| OK (for Floor Shift Type) | B |
| NG | C |
|
| ||||
|
| ||||
| A | ||
| ||