Home › ENGINE ยท 1GR-FE › FUEL › FUEL INJECTOR

FUEL INJECTOR > REMOVAL

for Preparation Click here



1. REMOVE INTAKE AIR SURGE TANK
(Click here)


2. DISCONNECT WIRE HARNESS


    A239472
  1. Disconnect the engine coolant temperature sensor connector.

  1. Detach the 3 wire harness clamps and disconnect the wire harness.



3. DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY


    A239742
  1. Disconnect the No. 1 fuel pipe sub-assembly (Click here).



4. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY


    A239743
  1. Disconnect the No. 2 fuel pipe sub-assembly (Click here).



5. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    A239744
  1. Disconnect the 6 fuel injector connectors.

  1. Remove the 4 bolts and fuel delivery pipe together with the 6 fuel injectors.

    NOTICE:
    Be careful not to drop the injectors when removing the fuel delivery pipe.



6. REMOVE FUEL INJECTOR ASSEMBLY


    A223038E01
  1. Remove the 6 fuel injectors from the fuel delivery pipe.
    Text in Illustration 
    *1
    Fuel Delivery Pipe
    *2
    Fuel Injector

  1. Remove the O-ring and injector vibration insulator from each fuel injector.