Components
| Function
|
Ultrasonic sensor
| The ultrasonic sensor sends and receives ultrasonic waves. Based on the received wave, the sensor calculates the approximate distance value between the vehicle and the obstacle, and sends the distance value as a signal to the clearance warning ECU assembly.
|
Combination meter assembly
| - Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.
- Emits an intermittent sound to inform the driver that the clearance warning ECU assembly has detected an obstacle within prescribed ranges.
- Receives speed of each wheel via the skid control ECU (brake actuator assembly), and then sends the signal to the clearance warning ECU assembly.
|
Back sonar or clearance sonar switch
| Output system ON/OFF signals to clearance warning ECU assembly.
|
Clearance warning ECU assembly
| Receives signals from the ultrasonic sensors and sends the display signal and buzzer signal to the combination meter assembly.
|
Park/neutral position switch assembly
| Sends a signal that activates the intuitive parking assist system when the shift lever is moved to R.
|