NAVIGATION SYSTEM > Cellular Phone Registration Failure |
| 1.CHECK USAGE CONDITION |
Check that the vehicle and cellular phone meet the following conditions:
Register the cellular phone again and check if it is registered correctly.
|
| ||||
| OK | ||
| ||
| 2.RESTART CELLULAR PHONE |
Turn the ignition switch off.
Turn the ignition switch to ACC.
Register the cellular phone as a connected device again and check if it is registered correctly.
|
| ||||
| OK | ||
| ||
| 3.CHECK BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE |
Place the cellular phone close to the navigation receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
|
| ||||
| OK | ||
| ||
| 4.CLEAR REGISTERED DEVICE INFORMATION |
Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
|
| ||||
| OK | ||
| ||
| 5.CHECK USING ANOTHER VEHICLE |
Check if the cellular phone can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
| Result | Proceed to |
| OK (for Column Shift Type) | A |
| OK (for Floor Shift Type) | B |
| NG | C |
|
| ||||
|
| ||||
| A | ||
| ||
| 6.CHECK USING ANOTHER CELLULAR PHONE |
Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.
| Result | Proceed to |
| OK | A |
| NG (for Column Shift Type) | B |
| NG (for Floor Shift Type) | C |
|
| ||||
|
| ||||
| A | ||
| ||