FUEL PRESSURE REGULATOR > REMOVAL |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
| 2. PRECAUTION |
| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 4. REMOVE INTAKE AIR SURGE TANK |
| 5. DISCONNECT WIRE HARNESS |
![]() |
Disconnect the engine coolant temperature sensor connector.
Detach the 3 wire harness clamps and disconnect the wire harness.
| 6. DISCONNECT WATER BY-PASS PIPE |
![]() |
Remove the 2 bolts and disconnect the water by-pass pipe.
| 7. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY |
![]() |
Disconnect the No. 2 fuel pipe sub-assembly (Click here).
| 8. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
Disconnect the vacuum hose.
![]() |
Remove the 2 bolts and fuel pressure regulator.
Remove the O-ring from the fuel pressure regulator.