Home › TRANSMISSION ยท A760F AUTOMATIC TRANSMISSION › OIL COOLER

OIL COOLER > REMOVAL

for Preparation Click here



1. DRAIN ENGINE COOLANT

CAUTION:
Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

HINT:
Collect the coolant in a container and dispose of it according to the regulations in your area.

  1. Loosen the radiator drain cock plug.

  1. Remove the radiator cap. Then drain the coolant from the radiator.

  1. Loosen the 2 cylinder block drain cock plugs. Then drain the coolant from the engine.



  1. Tighten the 2 cylinder block drain cock plugs.

    Torque:
    13 N*m{ 130 kgf*cm , 9 ft.*lbf }



    A215892E01

  1. Tighten the radiator drain cock plug by hand.



2. REMOVE FRONT EXHAUST PIPE ASSEMBLY
(Click here)


3. DISCONNECT WATER BY-PASS PIPE ASSEMBLY


C209353
  1. Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler to disconnect the water by-pass pipe.

    HINT:
    Use a container to catch any coolant which flows out of the water by-pass hoses.



4. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/o Trailer Towing System)


C209354
  1. Disconnect the 2 No. 1 transmission oil cooler hoses from the transmission.

  1. Remove the 3 bolts and transmission oil cooler with transmission oil cooler spacer.

  1. Remove the 2 No. 1 transmission oil cooler hoses from the transmission oil cooler spacer.



    C209355E01
  1. Remove the 3 bolts and transmission oil cooler from the transmission oil cooler spacer.

  1. Remove the 2 O-rings from the grooves of the transmission oil cooler.