Home › TRANSMISSION ยท A760E AUTOMATIC TRANSMISSION › SHIFT LEVER ASSEMBLY (for Column Shift Type)

SHIFT LEVER ASSEMBLY (for Column Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY
(Click here)


2. REMOVE COLUMN SHIFT ASSEMBLY
  1. Move the shift lever to N.



    C155885
  1. Disconnect the column shift transmission control cable end from the column shift.



    C155886
  1. Disconnect the connector and detach the harness clamp.

  1. Using a T30 "TORX" wrench, remove the 3 bolts and column shift.