Home › TRANSMISSION ยท AB60F AUTOMATIC TRANSMISSION › SHIFT LEVER ASSEMBLY (for Column Shift Type)

SHIFT LEVER ASSEMBLY (for Column Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY
(Click here)


2. REMOVE COLUMN SHIFT ASSEMBLY
  1. Move the shift lever to the N position.



    C155885
  1. Disconnect the column shift transmission control cable end from the column shift.



    C155886
  1. Disconnect the connector and detach the harness clamp.

  1. Using a T30 "TORX" wrench, remove the 3 bolts and column shift.