STARTER (for 1.6 kW Type) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH |
Remove the exhaust manifold RH (Click here).
| 4. REMOVE STARTER COVER |
![]() |
Remove the 3 bolts and starter cover.
| 5. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the 2 wire harness clamps.
Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
![]() |
Remove the 2 bolts and starter.
![]() |
Remove the flywheel housing side cover.