STARTER (for 1.6 kW Type) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH |
| 4. REMOVE STARTER ASSEMBLY |
![]() |
Remove the bolt and disconnect the ground wire.
Disconnect the starter connector.
Remove the terminal cap.
Remove the nut and disconnect the starter wire.
![]() |
Remove the 2 bolts and starter.
| 5. REMOVE FLYWHEEL HOUSING SIDE COVER |
![]() |