Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER

REAR SHOCK ABSORBER > INSPECTION

for Preparation Click here



1. INSPECT REAR SHOCK ABSORBER ASSEMBLY LH


C159745E01
  1. Compress and extend the shock absorber rod 4 times or more. Check that there is no abnormal resistance or unusual sound during the operation.
    If there is any abnormality, replace the shock absorber assembly with a new one.

    NOTICE:
    1. When disposing of the shock absorber, see DISPOSAL (Click here).
    2. Do not hold the rear shock absorber by the dust cover, as the dust cover will come off.