Home › RESTRAINTS › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for CrewMax)

REAR SEAT OUTER BELT ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR SEAT ASSEMBLY
(Click here)


2. REMOVE REAR DOOR SCUFF PLATE LH


B165842
  1. Detach the 6 claws and 2 clips, and remove the rear door scuff plate LH.



3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
  1. Partially remove the rear door opening trim weatherstrip so that the lower quarter trim panel assembly LH and front quarter trim panel assembly LH can be removed .



4. REMOVE NO. 1 BOX SPEAKER ASSEMBLY (w/ Woofer)


    B355077
  1. Remove the 3 bolts.



    B355078
  1. Disconnect the connector and remove the No. 1 box speaker assembly.



5. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY LH


B169107
  1. Detach the 2 claws and remove the cover.



    B169108
  1. Remove the bolt and disconnect the rear seat outer belt assembly.



    B355495
  1. Detach the 5 clips and remove the lower quarter trim panel assembly LH.



6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH


    B356805E01
  1. Apply protective tape as shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a screwdriver, detach the claw and open the cover.

    HINT:
    Tape the screwdriver tip before use.



    B356807
  1. Remove the 2 bolts.

  1. Detach the 4 clips and remove the front quarter trim panel assembly LH.

  1. Pass the rear seat outer belt assembly through the hole of the front quarter trim panel assembly LH.



7. REMOVE REAR SEAT OUTER BELT ASSEMBLY


B169110
  1. Remove the nut and disconnect the rear seat outer belt assembly.



    B169111
  1. Remove the 2 bolts and rear seat outer belt assembly.



8. REMOVE REAR SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


B169124
  1. Remove the 2 bolts and rear shoulder belt anchor adjuster assembly.