Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Traffic Information is not Displayed

for Preparation Click here


INSPECTION PROCEDURE

NOTICE:
  1. Traffic information requires payment. An "XM Nav Traffic" contract must be made between the satellite radio company and the user. If the contract expires, traffic information will not be available.
  2. Traffic information does not apply to all roads, only main roads. For the latest information on coverage areas, contact the satellite radio company.

1.CHECK DISPLAY
  1. Check which communication is not being used for displaying traffic information.

    HINT:
    Display of traffic information received via HD traffic is given priority while in an HD radio service area.

    Result 
    Result
    Proceed to
    Traffic information using HD radio communication is not displayed
    A
    Traffic information using Entune function communication is not displayed
    B



B
Go to step 3
A


2.CHECK SYMPTOMS
  1. Check for symptoms (poor sound quality, sounds cannot be heard, etc.) during conventional FM radio broadcasting.
    Result 
    Result
    Proceed to
    Symptoms occur
    A
    Symptoms do not occur
    B



B
Go to step 5
A

GO TO "RADIO BROADCAST CANNOT BE RECEIVED OR POOR RECEPTION" IN PROBLEM SYMPTOMS TABLE 

3.CHECK SYMPTOMS
  1. Check for symptoms (cellular phone cannot be registered, applications cannot be started, etc.) with an ordinary Entune function.
    Result 
    Result
    Proceed to
    Symptoms occur
    A
    Symptoms do not occur
    B



B
Go to step 4
A

GO TO "ENTUNE FUNCTION" IN PROBLEM SYMPTOMS TABLE (Click here)  

4.CHECK SETTINGS
  1. Check if the navigation system is set to receive traffic information using Entune function communication as well as HD radio communication.

    OK:
    The navigation system is set to use Entune function communication.



NG
END
OK


5.CHECK SETTINGS OF TRAFFIC INFORMATION
  1. Check if the display setting of traffic information on the navigation screen is on.

    OK:
    The display setting of traffic information is on.



NG
END
OK


6.CHECK COVERAGE AREA
  1. Check that the current position of the vehicle is within the HD traffic or Entune function coverage area.

    OK:
    Vehicle is within coverage area.



NG
MOVE TO WITHIN COVERAGE AREA (FOR LATEST COVERAGE AREA, CONFIRM WITH RADIO STATION)
OK


7.CHECK SCALE OF MAP DISPLAY
  1. Check if the traffic information that is currently not displayed can be displayed at the scale shown in the table below.

    Traffic Information to be Displayed
    Display Scale
    Traffic information list
    1:1280000 or below
    Traffic information icon (Closed Road, Accidents, Danger, Road Conditions, Road Works, Weather)
    1:640000 or below
    Traffic information icon (Stationary Traffic Jam, Delays, Parking, Other)
    1:80000 or below

    OK:
    Traffic information can be displayed.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)

C
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
A

END