Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY


  1. Install the headlight dimmer switch assembly to the steering column, making sure that the stopper protrusions and cutout parts align.


    E281389E01


    Text in Illustration 
    *A
    for Manual Tilt, for Manual Tilt and Manual Telescopic Steering Column
    *B
    for Power Tilt and Power Telescopic Steering Column

  1. While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.



  1. Connect the connector.


    E281387E01


    Text in Illustration 
    *A
    for Manual Tilt, for Manual Tilt and Manual Telescopic Steering Column
    *B
    for Power Tilt and Power Telescopic Steering Column



2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    E146421
  1. Attach the claw to install the wiper switch.

  1. Connect the 2 connectors.



3. INSTALL SPIRAL CABLE SUB-ASSEMBLY
(Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



5. CHECK SRS WARNING LIGHT
(Click here)