AIR PUMP > INSTALLATION |
| 1. INSTALL AIR PUMP ASSEMBLY |
![]() |
Set the air pump assembly in place so that the bracket tab on the air pump bracket fits into the slot on the vehicle and the stud on the vehicle fits into the slot on the air pump bracket (View A).
| *1 | View A |
| *2 | View B |
| *3 | Stud |
| *4 | Bracket Tab |
Insert the bracket tab into the slot (View B).
Install the 2 bolts and 2 nuts.
| 2. INSTALL NO. 2 AIR INJECTION SYSTEM HOSE |
Install the No. 2 air injection system hose as shown in the illustration.

| *1 | Air Injection Hose | *2 | Wire Harness |
| *3 | White Paint Mark | - | - |
Attach the clamp.
![]() |
Connect the air injection system hose to the air tube assembly shown in the illustration.
| *1 | Protrusion |
| *2 | Paint Mark |
| *a | Upper |
Attach the air pump connector clamp.
Connect the air pump connectors.
Install the fender apron seal with the 2 clips.
| 3. CONNECT FRONT FENDER LINER RH |