Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › AIR PUMP

AIR PUMP > REMOVAL

for Preparation Click here



1. DISCONNECT FRONT FENDER LINER RH
(Click here)

HINT:
It is not necessary to fully remove the front fender liner RH.
Partially remove it so that the air pump assembly with bracket can be removed in a later step.



2. REMOVE NO. 2 AIR INJECTION SYSTEM HOSE


    A153461
  1. Using a clip remover, remove the 2 clips.

  1. Fold back the fender apron seal.



    A238149
  1. Disconnect the air pump connector.

  1. Detach the air pump connector clamp.



    A238088
  1. Disconnect the air injection system hose from the air tube assembly.



    A238150
  1. Detach the clamp.



    A238159
  1. Remove the No. 2 air injection system hose.



3. REMOVE AIR PUMP ASSEMBLY


    A238160
  1. Remove the 2 bolts, 2 nuts and air pump assembly.