Home › BODY › SEAT › FRONT SEAT CUSHION HEATER (for Manual Seat)

FRONT SEAT CUSHION HEATER (for Manual Seat) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE FRONT SEAT ASSEMBLY RH

HINT:
Use the same procedure as for the driver seat (Click here).



2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
  1. Raise the reclining adjuster release handle RH to reveal the claw.



    B356049E01
  1. Using a screwdriver, detach the claw and remove the reclining adjuster release handle RH.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



3. REMOVE FRONT SEAT CUSHION SHIELD RH


    B356050
  1. Disconnect the 2 rubber bands.



    B356051E01
  1. Remove the 3 screws.

  1. Detach the guide, clip and 2 claws as indicated by the arrows in the order shown in the illustration to remove the front seat cushion shield RH.



4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD RH


    B356052
  1. Remove the 2 screws.

  1. Detach the guide in the direction indicated by the arrow shown in the illustration to remove the front inner No. 1 seat cushion shield RH.



5. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    B354558
  1. Disconnect the connector.

  1. Detach the wire harness clamp to disconnect the wire harness of the front seatback heater assembly RH.



    B356053E01
  1. Detach the connector clamp and 3 wire harness clamps to disconnect the wire harness of the front seat airbag assembly RH.
    Text in Illustration 
    *1
    Connector Clamp
    *2
    Wire Harness Clamp



    B356054
  1. Remove the 4 bolts and separate type front seatback assembly.



6. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


  1. Detach the 12 hooks and remove the separate type front seat cushion cover with pad.


    B356061



7. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B356062E01
  1. Detach the 2 fasteners.

  1. Remove the 10 hog rings and separate type front seat cushion cover.
    Text in Illustration 
    *1
    Fastener



8. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH


    B356063
  1. Detach the 10 tack pins to remove the front seat cushion heater assembly RH.