Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH

FRONT POWER SEAT LUMBAR SWITCH > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE FRONT SEAT ASSEMBLY LH
(Click here)


2. REMOVE FRONT SEAT CUSHION SHIELD LH


    B354887
  1. Disconnect the 2 rubber bands.



    B354888E01
  1. Remove the 2 screws.

  1. Detach the guide, clip and 2 claws as indicated by the arrows in the order shown in the illustration.



    B354890E01
  1. w/o Leg Support Adjustment Switch:

    1. Detach the clamp and disconnect the 2 connectors to remove the front seat cushion shield LH.

  1. w/ Leg Support Adjustment Switch:

    1. Detach the clamp and disconnect the 4 connectors to remove the front seat cushion shield LH.
      Text in Illustration 
      *A
      w/o Leg Support Adjustment Switch
      *B
      w/ Leg Support Adjustment Switch



3. REMOVE FRONT POWER SEAT LUMBAR SWITCH LH


    B354894
  1. Detach the 4 claws to remove the front power seat lumbar switch LH.