Home › BODY › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY

LUMBAR SUPPORT ADJUSTER ASSEMBLY > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE FRONT SEAT ASSEMBLY LH
(Click here)


2. REMOVE FRONT SEAT CUSHION SHIELD LH


    B354887
  1. Disconnect the 2 rubber bands.



    B354888E01
  1. Remove the 2 screws.

  1. Detach the guide, clip and 2 claws as indicated by the arrows in the order shown in the illustration.



    B354890E01
  1. w/o Leg Support Adjustment Switch:

    1. Detach the clamp and disconnect the 2 connectors to remove the front seat cushion shield LH.

  1. w/ Leg Support Adjustment Switch:

    1. Detach the clamp and disconnect the 4 connectors to remove the front seat cushion shield LH.
      Text in Illustration 
      *A
      w/o Leg Support Adjustment Switch
      *B
      w/ Leg Support Adjustment Switch



3. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH


    B354898
  1. Remove the 2 screws.

  1. Detach the guide in the direction indicated by the arrow shown in the illustration to remove the front inner No. 1 seat cushion shield LH.



4. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    B354900
  1. w/ Seat Heater System:

    1. Disconnect the connector.

    2. Detach the wire harness clamp to disconnect the wire harness of the front seatback heater assembly LH.



    B354901
  1. Disconnect the connector.

  1. Detach the wire harness clamp to disconnect the wire harness of the front seatback wire LH.



    B354902E01
  1. Detach the connector clamp and 3 wire harness clamps to disconnect the wire harness of the front seat airbag assembly LH.
    Text in Illustration 
    *1
    Connector Clamp
    *2
    Wire Harness Clamp



    B354903
  1. Remove the 4 bolts and separate type front seatback assembly.



5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B354904
  1. Detach the hook.



    B354905E01
  1. w/o Seat Heater System:

    1. Pull out the 2 wire harnesses from the separate type front seatback cover.

  1. w/ Seat Heater System:

    1. Pull out the 3 wire harnesses from the separate type front seatback cover.
      Text in Illustration 
      *A
      w/ Seat Heater System



    B354906
  1. Open the 2 fasteners.



    B354907
  1. Detach the 2 hooks.

    1. Remove the 4 clips.

    2. Slide each hook to detach them.

  1. Pull out the 4 straps of the separate type front seatback cover from the separate type front seatback pad.



    B354911E01
  1. Detach the 6 fasteners.
    Text in Illustration 
    *1
    Fastener



    B354908
  1. Remove the 2 hog rings.



    B354910
  1. Detach the 4 claws to remove the 2 front seat headrest supports.

  1. Remove the separate type front seatback cover from the separate type front seatback pad.



6. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    B354913
  1. w/ Climate Control Seat System:

    1. Detach the 6 clips.

  1. Remove the separate type front seatback pad from the front seatback frame sub-assembly LH.



7. REMOVE FRONT SEATBACK WIRE LH (for Driver Side)


    B354945
  1. w/o Climate Control Seat System:

    1. Disconnect the 2 connectors.

    2. Detach the 3 clamps to remove the front seatback wire LH.



    B354914
  1. w/ Climate Control Seat System:

    1. Disconnect the 3 connectors.

    2. Detach the 5 clamps to remove the front seatback wire LH.



8. REMOVE FRONT SEATBACK WIRE RH (for Front Passenger Side)


    B356554
  1. Disconnect the 3 connectors.

  1. Detach the 4 clamps to remove the front seatback wire RH.



9. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    B354919
  1. Detach the 2 clips and 2 guides to remove the lumbar support adjuster assembly LH.



10. REMOVE FRONT SEATBACK HOOK
  1. Remove the 2 front seatback hooks from the lumbar support adjuster assembly LH.



11. REMOVE SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)


    B359182
  1. Spread the wires of the lumbar support adjuster assembly LH in the direction indicated by the arrow shown in the illustration to detach the 2 claws.



    B356555
  1. Detach the 2 hooks.



    B354917
  1. Remove the seatback climate control blower LH in the direction indicated by the arrow shown in the illustration.