FRONT SEATBACK HEATER (for Power Seat) > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY LH |
| 2. REMOVE FRONT SEAT CUSHION SHIELD LH |
![]() |
Disconnect the 2 rubber bands.
![]() |
Remove the 2 screws.
Detach the guide, clip and 2 claws as indicated by the arrows in the order shown in the illustration.
![]() |
w/o Leg Support Adjustment Switch:
Detach the clamp and disconnect the 2 connectors to remove the front seat cushion shield LH.
w/ Leg Support Adjustment Switch:
Detach the clamp and disconnect the 4 connectors to remove the front seat cushion shield LH.
| *A | w/o Leg Support Adjustment Switch |
| *B | w/ Leg Support Adjustment Switch |
| 3. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH |
![]() |
Remove the 2 screws.
Detach the guide in the direction indicated by the arrow shown in the illustration to remove the front inner No. 1 seat cushion shield LH.
| 4. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY |
![]() |
w/ Seat Heater System:
Disconnect the connector.
Detach the wire harness clamp to disconnect the wire harness of the front seatback heater assembly LH.
![]() |
Disconnect the connector.
Detach the wire harness clamp to disconnect the wire harness of the front seatback wire LH.
![]() |
Detach the connector clamp and 3 wire harness clamps to disconnect the wire harness of the front seat airbag assembly LH.
| *1 | Connector Clamp |
| *2 | Wire Harness Clamp |
![]() |
Remove the 4 bolts and separate type front seatback assembly.
| 5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Detach the hook.
![]() |
w/o Seat Heater System:
Pull out the 2 wire harnesses from the separate type front seatback cover.
w/ Seat Heater System:
Pull out the 3 wire harnesses from the separate type front seatback cover.
| *A | w/ Seat Heater System |
![]() |
Open the 2 fasteners.
![]() |
Detach the 2 hooks.
Remove the 4 clips.
Slide each hook to detach them.
Pull out the 4 straps of the separate type front seatback cover from the separate type front seatback pad.
![]() |
Detach the 6 fasteners.
| *1 | Fastener |
![]() |
Remove the 2 hog rings.
![]() |
Detach the 4 claws to remove the 2 front seat headrest supports.
Remove the separate type front seatback cover from the separate type front seatback pad.
| 6. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH |
![]() |
Remove the 8 tack pins to remove the front seatback heater assembly LH.