FRONT SEAT CUSHION HEATER (for Power Seat) > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
| 2. REMOVE FRONT SEAT CUSHION SHIELD LH |
![]() |
Disconnect the 2 rubber bands.
![]() |
Remove the 2 screws.
Detach the guide, clip and 2 claws as indicated by the arrows in the order shown in the illustration.
![]() |
w/o Leg Support Adjustment Switch:
Detach the clamp and disconnect the 2 connectors to remove the front seat cushion shield LH.
w/ Leg Support Adjustment Switch:
Detach the clamp and disconnect the 4 connectors to remove the front seat cushion shield LH.
| *A | w/o Leg Support Adjustment Switch |
| *B | w/ Leg Support Adjustment Switch |
| 3. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH |
![]() |
Remove the 2 screws.
Detach the guide in the direction indicated by the arrow shown in the illustration to remove the front inner No. 1 seat cushion shield LH.
| 4. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY |
![]() |
w/ Seat Heater System:
Disconnect the connector.
Detach the wire harness clamp to disconnect the wire harness of the front seatback heater assembly LH.
![]() |
Disconnect the connector.
Detach the wire harness clamp to disconnect the wire harness of the front seatback wire LH.
![]() |
Detach the connector clamp and 3 wire harness clamps to disconnect the wire harness of the front seat airbag assembly LH.
| *1 | Connector Clamp |
| *2 | Wire Harness Clamp |
![]() |
Remove the 4 bolts and separate type front seatback assembly.
| 5. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
![]() |
Disconnect the connector.
Detach the connector clamp and 2 wire harness clamps to disconnect the seat cushion wire LH.
| *1 | Connector Clamp |
| *2 | Wire Harness Clamp |
for Driver Side:
Detach the 11 hooks.

![]() |
w/ Leg Support Adjustment Switch:
Detach the 4 hooks.
![]() |
w/ Leg Support Adjustment Switch:
Remove the 4 hog rings.
Remove the separate type front seat cushion cover with pad from the front seat cushion frame sub-assembly LH.
for Front Passenger Side:
Detach the 12 hooks.
Remove the separate type front seat cushion cover with pad from the front seat cushion frame sub-assembly RH.

| 6. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Detach the 2 fasteners.
| *1 | Fastener |
Remove the 10 hog rings and separate type front seat cushion cover.
| 7. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH |
![]() |
Detach the 10 tack pins to remove the front seat cushion heater assembly LH.