Home › BODY › SEAT › SEAT VARIABLE CUSHION SWITCH

SEAT VARIABLE CUSHION SWITCH > INSTALLATION

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL SEAT VARIABLE CUSHION SWITCH
  1. Install the seat variable cushion switch with the 2 screws.

  1. Connect the connector.



2. INSTALL FRONT SEAT CUSHION SHIELD LH


    B354890E01
  1. w/o Leg Support Adjustment Switch:

    1. Connect the 2 connectors and attach the clamp to install the front seat cushion shield LH.

  1. w/ Leg Support Adjustment Switch:

    1. Connect the 4 connectors and attach the clamp to install the front seat cushion shield LH.
      Text in Illustration 
      *A
      w/o Leg Support Adjustment Switch
      *B
      w/ Leg Support Adjustment Switch



    B354889E01
  1. Attach the 2 claws, clip and guide as indicated by the arrows in the order shown in the illustration.

  1. Install the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. Connect the 2 rubber bands.



3. INSTALL FRONT SEAT ASSEMBLY LH
(Click here)