Home › TRANSMISSION ยท AB60F AUTOMATIC TRANSMISSION › SHIFT LEVER ASSEMBLY (for Floor Shift Type)

SHIFT LEVER ASSEMBLY (for Floor Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE NO. 1 CONSOLE BOX DUCT (w/ Rear Air Duct)


    C290566
  1. Remove the 2 clips and No. 1 console box duct.



3. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
  1. Move the shift lever to N.



    C179204
  1. Disconnect the transmission control cable end from the shift lever assembly.



    C179206
  1. Remove the clip and disconnect the transmission control cable assembly from the shift lever retainer.



    C290569
  1. Disconnect the clamp and 2 connectors from the shift lever assembly.

  1. Remove the 4 bolts and shift lever assembly.