SHIFT LEVER ASSEMBLY (for Floor Shift Type) > REMOVAL |
| 1. REMOVE CONSOLE BOX ASSEMBLY |
| 2. REMOVE NO. 1 CONSOLE BOX DUCT (w/ Rear Air Duct) |
![]() |
Remove the 2 clips and No. 1 console box duct.
| 3. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY |
Move the shift lever to N.
![]() |
Disconnect the transmission control cable end from the shift lever assembly.
![]() |
Remove the clip and disconnect the transmission control cable assembly from the shift lever retainer.
![]() |
Disconnect the clamp and 2 connectors from the shift lever assembly.
Remove the 4 bolts and shift lever assembly.