TRANSMISSION CONTROL CABLE (for Floor Shift Type) > REMOVAL |
| 1. REMOVE CONSOLE BOX ASSEMBLY |
| 2. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Move the shift lever to N.
Disconnect the transmission control cable end from the shift lever.
![]() |
Remove the clip and disconnect the transmission control cable from the shift lever retainer.
![]() |
Remove the nut and clip, and disconnect the transmission control cable from the automatic transmission.
![]() |
Remove the nut and disconnect the transmission control cable support.
![]() |
Remove the 2 bolts and then pull the transmission control cable into the vehicle to remove it.