Home › SECURITIES › ENGINE IMMOBILISER › TRANSPONDER KEY ECU

TRANSPONDER KEY ECU > INSTALLATION

for Preparation Click here



1. INSTALL TRANSPONDER KEY ECU


    B356577
  1. Hook the upper part of the transponder key ECU, and then hook the lower part to install the transponder key ECU as shown in the illustration.



2. INSTALL AIR CONDITIONING UNIT
(Click here)


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. REGISTER ENGINE IMMOBILISER SYSTEM
(Click here)


5. CHECK SRS WARNING LIGHT
(Click here)