EGR COOLER > REMOVAL |
| 1. REMOVE INTAKE MANIFOLD ASSEMBLY |
Remove the intake manifold (Click here).
| 2. REMOVE NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY |
![]() |
Disconnect the No. 4 water by-pass hose.
Disconnect the hose and remove the 2 bolts and No. 3 water by-pass pipe.
| 3. DISCONNECT NO. 8 WATER BY-PASS HOSE |
![]() |
Disconnect the No. 8 water by-pass hose.
| 4. DISCONNECT NO. 11 WATER BY-PASS HOSE |
![]() |
Disconnect the No. 11 water by-pass hose.
| 5. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY |
![]() |
Remove the 4 nuts and EGR pipe.
Remove the 2 gaskets.
| 6. REMOVE EGR COOLER ASSEMBLY |
![]() |
Remove the 2 bolts and EGR cooler.
| 7. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY |
![]() |
Remove the 2 bolts, No. 2 EGR pipe and gasket.