Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    B158C    SD Card Communication Malfunction

for Preparation Click here


DESCRIPTION

The navigation receiver assembly stores this DTC when the SD card cannot be mounted when inserted into the SD card slot.

DTC Code
DTC Detection Condition
Trouble Area
B158C
The SD card cannot be mounted when inserted into the SD card slot.
  1. SD card
  2. Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK SD CARD
  1. Turn the ignition switch off and remove the SD card from the SD card slot.

  1. Check that the SD card is not damaged.

    OK:
    The SD card is not damaged.



NG
REPLACE SD CARD
OK


2.CLEAN COMPONENTS
  1. Check that the terminals of the SD card are free of foreign matter. Remove foreign matter as necessary.

  1. Check that the SD card slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.

  1. Insert the SD card into the SD card slot.


NEXT


3.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output (Click here).

    OK:
    No DTCs are output.



NG
Go to step 4
OK

END (FOREIGN MATTER IS ADHERED TO SD CARD OR SD CARD SLOT) 

4.REPLACE SD CARD
  1. Replace the SD card.

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output (Click here).

    OK:
    No DTCs are output.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for Column Shift Type)
    B
    NG (for Floor Shift Type)
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)

C
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
A

END (SD CARD IS DEFECTIVE)