Home › Vehicle Exterior › BODY WELD POINT › QUARTER LOCK PILLAR REINFORCEMENT
BM27M0U _01 Vehicle Exterior _049435 BODY WELD POINT _0236700 QUARTER LOCK PILLAR REINFORCEMENT F

BODY WELD POINT  QUARTER LOCK PILLAR REINFORCEMENT  CUT AND JOIN REPLACEMENT SECTIONS  


Regular Cab


K125900

With the quarter panel removed.


a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location

K125957C01
6.51,8.521 6.823,8.677 0.313,0.156 10 false *a 3.063,3.063 3.792,3.365 0.729,0.302 10 false 100 (3.94) 1.563,6.156 2.271,6.49 0.708,0.333 10 false 110 (4.33)
*a mm (in.) - -


K125958C01
6.604,8.542 6.917,8.698 0.313,0.156 10 false *a 6.094,6.083 6.688,6.344 0.594,0.26 10 false 30 (1.18) 4.5,5.24 5.292,5.458 0.792,0.219 10 false 180 (7.09) 4.354,5.594 5.042,5.833 0.688,0.24 10 false 80 (3.15)
*a mm (in.) - -



b.

INSTALLATION

Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108827

Cut and Join Location
K108829

Cut Location
K108830

Fillet Weld
K108831

Butt Weld

INSTALLATION POINT
1.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

2.

After welding, apply polyurethane foam to the corresponding parts. (See the painting / coating)

3.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125959C01
6.615,8.531 6.958,8.813 0.344,0.281 10 false *a 3.625,1.083 4.365,1.302 0.74,0.219 10 false 100 (3.94) 2,4.198 2.74,4.417 0.74,0.219 10 false 180 (7.09) 4.625,5.271 5.365,5.49 0.74,0.219 10 false 180 (7.09) 4.51,5.604 5.25,5.823 0.74,0.219 10 false 80 (3.15) 6.25,6.271 6.823,6.49 0.573,0.219 10 false 30 (1.18)
*a mm (in.) - -


K125960C01
6.708,8.604 7.021,8.76 0.313,0.156 10 false *a 1.604,5.906 2.208,6.104 0.604,0.198 10 true 27 (1.06) 1.323,6.417 1.906,6.594 0.583,0.177 10 false 18 (0.71)
*a mm (in.) - -




Double Cab


K125901

With the quarter panel removed.


a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location

K125961C01
6.51,8.51 6.823,8.667 0.313,0.156 10 false *a 1.479,6.333 2.177,6.594 0.698,0.26 10 false 125 (4.92) 2.958,2.823 3.656,3.083 0.698,0.26 10 false 100 (3.94)
*a mm (in.) - -


K125962C01
6.625,8.521 6.938,8.677 0.313,0.156 10 false *a 6.313,5.833 7.042,6.052 0.729,0.219 10 false 120 (4.72)
*a mm (in.) - -



b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108827

Cut and Join Location
K108830

Fillet Weld
K108831

Butt Weld

INSTALLATION POINT
1.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

2.

After welding, apply polyurethane foam to the corresponding parts. (See the painting / coating)

3.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125963C01
6.656,8.552 6.969,8.708 0.313,0.156 10 false *a 5.719,5.677 6.469,5.917 0.75,0.24 10 false 120 (4.72) 2.635,1.156 4.167,1.354 1.531,0.198 10 false 100 (3.94) 1.26,4.26 2.792,4.458 1.531,0.198 10 false 125 (4.92)
*a mm (in.) - -


K125964C01
6.625,8.531 6.938,8.688 0.313,0.156 10 false *a 2.438,5.156 3.063,5.375 0.625,0.219 10 false 27 (1.06) 2.177,6 2.75,6.219 0.573,0.219 10 true 18 (0.71)
*a mm (in.) - -




CrewMax


K125902

With the quarter panel removed.


a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

K125965C01
6.698,8.552 7.01,8.708 0.313,0.156 10 false *a 3.01,2.885 4.385,3.083 1.375,0.198 10 false 30 (1.18) 1.385,6.219 2.76,6.417 1.375,0.198 10 false 140 (5.51)
*a mm (in.) - -


K125966C01
6.719,8.531 7.031,8.688 0.313,0.156 10 false *a 6.083,5.396 6.76,5.708 0.677,0.313 10 false 110 (4.33)
*a mm (in.) - -



b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108827

Cut and Join Location
K108831

Butt Weld

INSTALLATION POINT
1.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

2.

After welding, apply polyurethane foam to the corresponding parts. (See the painting / coating)

3.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125967C01
2.719,1.177 4.094,1.375 1.375,0.198 10 false 30 (1.18) 5.927,5.333 6.688,5.604 0.76,0.271 10 false 110 (4.33) 6.646,8.594 6.958,8.75 0.313,0.156 10 false *a
*a mm (in.) - -


K125968