Home › Vehicle Exterior › BODY WELD POINT › BACK PANEL › 2015.08–2016.08
BM27M0U _01 Vehicle Exterior _049435 BODY WELD POINT _0236701 BACK PANEL F

BODY WELD POINT  BACK PANEL  ASSEMBLY REPLACEMENT  


Regular Cab


K125903

a.

REMOVAL / INSTALLATION

Symbol Meaning
K108818

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108821

Spot Weld
K108823

Plug Weld
K108830

Fillet Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125969C01
6.573,8.5 6.885,8.656 0.313,0.156 10 false *a 6.323,4.854 6.948,5.073 0.625,0.219 10 false 27 (1.06) 6.271,7.094 6.875,7.354 0.604,0.26 10 false 18 (0.71)
*a mm (in.) - -




Double Cab


K125904

a.

REMOVAL / INSTALLATION

Symbol Meaning
K108818

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108821

Spot Weld
K108823

Plug Weld
K108830

Fillet Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125970C01
6.563,8.469 6.875,8.625 0.313,0.156 10 false *a 6.26,4.938 6.896,5.135 0.635,0.198 10 false 27 (1.06) 6.25,7.135 6.875,7.375 0.625,0.24 10 false 18 (0.71)
*a mm (in.) - -




CrewMax


K125905

a.

REMOVAL / INSTALLATION

Symbol Meaning
K108818

Remove Weld Points
K108823

Plug Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125971C01
4.875,7.927 5.125,8.135 0.25,0.208 10 false *A 4.875,8.313 5.125,8.521 0.25,0.208 10 false *B
*A LH *B RH