Home › Vehicle Exterior › BODY WELD POINT › ROOF PANEL(for Standard Roof) › 2015.08–2016.08
BM27M0U _01 Vehicle Exterior _049435 BODY WELD POINT _0236702 ROOF PANEL(for Standard Roof) F

BODY WELD POINT  ROOF PANEL(for Standard Roof)  ASSEMBLY REPLACEMENT  


Regular Cab


K125906

a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points

K125972


b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back door opening frame.

HINT:

Apply just enough body sealer for the new parts to make contact.


3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125973



Double Cab


K125907

a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points

K125974


b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back door opening frame.

HINT:

Apply just enough body sealer for the new parts to make contact.


3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125975



CrewMax


K125908

a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points

K125976


b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back door opening frame.

HINT:

Apply just enough body sealer for the new parts to make contact.


3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125977