Upper Face (Regular Cab Standard Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Body mounting hole | φ26 (1.02) |
| B, b | Shock absorber installation hole | φ12.2 (0.480) |
| C, c | Body mounting hole | φ92.5 (3.641) |
| D, d | Body mounting hole | φ92.5 (3.641) |
| E, e | Rear body installation nut | M12 (0.47) |
| F, f | Rear body installation nut | M12 (0.47) |
| G, g | Rear body installation nut | M12 (0.47) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Lower Face (Regular Cab Standard Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Bumper reinforcement installation bolt | M10 (0.39) |
| B, b | Front stabilizer bracket installation nut | M12 (0.47) |
| C, c | Suspension lower arm installation hole | 40X22 (1.57X0.87) |
| D, d | Suspension lower arm installation hole | 36.5X18.5 (1.437X0.728) |
| E, e | Side rail inner channel standard hole | 16X16 (0.63X0.63) |
| F, f | Rear spring front hanger hole-inner | φ14.3 (0.563) |
| G, g | Frame rear crossmember installation assembly hole | φ8 (0.31) |
| H, h | Spring shackle installation hole-inner | φ40 (1.57) |
| I, i | Rear frame rail No. 3 patch installation hole | φ13 (0.51) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Upper Face (Regular Cab Long Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Body mounting hole | φ26 (1.02) |
| B, b | Shock absorber installation hole | φ12.2 (0.480) |
| C, c | Body mounting hole | φ92.5 (3.641) |
| D, d | Body mounting hole | M12 (0.47) |
| E, e | Rear body installation nut | M12 (0.47) |
| F, f | Rear body installation nut | M12 (0.47) |
| G, g | Rear body installation nut | M12 (0.47) |
| H, h | Rear body installation nut | - |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Lower Face (Regular Cab Long Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Bumper reinforcement installation bolt | M10 (0.39) |
| B, b | Front stabilizer bracket installation nut | M12 (0.47) |
| C, c | Suspension lower arm installation hole | 42X24 (1.65X0.94) |
| D, d | Suspension lower arm installation hole | 36.5X18.5 (1.437X0.728) |
| E, e | Side rail inner channel standard hole | 16X16 (0.63X0.63) |
| F, f | Rear spring front hanger hole-inner | φ14.3 (0.563) |
| G, g | Frame rear crossmember installation assembly hole | φ8 (0.31) |
| H, h | Spring shackle installation hole-inner | φ40 (1.57) |
| I, i | Rear frame rail No. 3 patch installation hole | φ13 (0.51) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Upper Face (Double Cab Standard Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Body mounting hole | φ26 (1.02) |
| B, b | Shock absorber installation hole | φ12.2 (0.480) |
| C, c | Body mounting hole | φ92.5 (3.641) |
| D, d | Body mounting hole | φ92.5 (3.641) |
| E, e | Rear body installation nut | M12 (0.47) |
| F, f | Rear body installation nut | M12 (0.47) |
| G, g | Rear body installation nut | M12 (0.47) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Lower Face (Double Cab Standard Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Bumper reinforcement installation bolt | M10 (0.39) |
| B, b | Front stabilizer bracket installation nut | M12 (0.47) |
| C, c | Suspension lower arm installation hole | 42X24 (1.65X0.94) |
| D, d | Suspension lower arm installation hole | 36.5X18.5 (1.437X0.728) |
| E, e | Side rail inner channel standard hole | 16X16 (0.63X0.63) |
| F, f | Rear spring front hanger hole-inner | φ14.3 (0.563) |
| G, g | Frame rear crossmember installation assembly hole | φ8 (0.31) |
| H, h | Spring shackle installation hole-inner | φ40 (1.57) |
| I, i | Rear frame rail No. 3 patch installation hole | φ13 (0.51) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Upper Face (Double Cab Long Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Body mounting hole | φ26 (1.02) |
| B, b | Shock absorber installation hole | φ12.2 (0.480) |
| C, c | Body mounting hole | φ92.5 (3.641) |
| D, d | Body mounting hole | φ92.5 (3.641) |
| E, e | Rear body installation nut | M12 (0.47) |
| F, f | Rear body installation nut | M12 (0.47) |
| G, g | Rear body installation nut | M12 (0.47) |
| H, h | Rear body installation nut | M12 (0.47) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Lower Face (Double Cab Long Deck)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Bumper reinforcement installation bolt | M10 (0.39) |
| B, b | Front stabilizer bracket installation nut | M12 (0.47) |
| C, c | Suspension lower arm installation hole | 42X24 (1.65X0.94) |
| D, d | Suspension lower arm installation hole | 36.5X18.5 (1.437X0.728) |
| E, e | Side rail inner channel standard hole | 16X16 (0.63X0.63) |
| F, f | Rear spring front hanger hole-inner | φ14.3 (0.563) |
| G, g | Frame rear crossmember installation assembly hole | φ8 (0.31) |
| H, h | Spring shackle installation hole-inner | φ40 (1.57) |
| I, i | Rear frame rail No. 3 patch installation hole | φ13 (0.51) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |
Upper Face (CrewMax)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Body mounting hole | φ26 (1.02) |
| B, b | Shock absorber installation hole | φ12.2 (0.480) |
| C, c | Body mounting hole | φ92.5 (3.641) |
| D, d | Body mounting hole | φ92.5 (3.641) |
| E, e | Rear body installation nut | M12 (0.47) |
| F, f | Rear body installation nut | M12 (0.47) |
| G, g | Rear body installation nut | M12 (0.47) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Vehicle Dimensions | *b | Imaginary Datum Line |
| *c | mm
(in.) |
- | - |
Lower Face (CrewMax)
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Bumper reinforcement installation bolt | M10 (0.39) |
| B, b | Front stabilizer bracket installation nut | M12 (0.47) |
| C, c | Suspension lower arm installation hole | 42X24 (1.65X0.94) |
| D, d | Suspension lower arm installation hole | 36.5X18.5 (1.437X0.728) |
| E, e | Side rail inner channel standard hole | 16X16 (0.63X0.63) |
| F, f | Lower arm installation hole | φ14.3 (0.563) |
| G, g | Upper arm installation hole | φ8 (0.31) |
| H, h | Spring shackle installation hole-inner | φ40 (1.57) |
| I, i | Rear frame rail No. 3 patch installation hole | φ13 (0.51) |
| *A | RH | *B | LH |
| *C | Front | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |