Home › General › INTRODUCTION › ABOUT THIS VEHICLE › 2015.08–2016.08
BM27M0U _V1 General _049434 INTRODUCTION _0236722 ABOUT THIS VEHICLE F

INTRODUCTION  ABOUT THIS VEHICLE  EXTERIOR RESIN PARTS AND RESIN CHARACTERISTICS  


PLASTIC PROPERTIES CHART


When repairing, some parts may be deformed by the heat. Therefore, confirm the properties of the plastic parts, and remove parts beforehand as necessary.

Code Material Name Heat Resistant Temperature Limit* °C (°F) Resistance to Alcohol or Gasoline Notes
AAS Acrylonitrile Acrylic Styrene 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
ABS Acrylonitrile Butadiene Styrene 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
AES Acrylonitrile Ethylene Styrene 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
ASA Acrylonitrile Styrene Acrylate 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
CAB Cellulose Acetate 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
EPDM Ethylene Propylene 100 (212) Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. Most solvents are harmless but avoid dipping in gasoline, solvents, etc.
EVA Ethylene Acetate 70 (158) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
E/VAC Ethylene/Vinyl Acetate Copolymer Resin 70 (158) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
FRP Fiber Reinforced Plastics 180 (356) Alcohol and gasoline are harmless. Avoid alkali.
PA Polyamide (Nylon) 80 (176) Alcohol and gasoline are harmless. Avoid battery acid.
PBT Polybutylene Terephthalate 160 (320) Alcohol and gasoline are harmless. Most solvents are harmless.
PC Polycarbonate 120 (248) Alcohol is harmless. Avoid gasoline, brake fluid, wax, wax removers and organic solvents. Avoid alkali.
PE Polyethylene 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PEI Polyetherimide 160 (320) Alcohol and gasoline are harmless. Most solvents are harmless.
PET Polyethylene Terephthalate 75 (167) Alcohol and gasoline are harmless. Avoid dipping in water.
PGM Polypropylene Glass Fiber Pulp 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PMMA Polymethyl Methacrylate 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
POM Polyoxymethylene (Polyacetal) 100 (212) Alcohol and gasoline are harmless. Most solvents are harmless.
PP Polypropylene 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PPC Polyphthlate Carbonate 149 (300) Alcohol and gasoline are harmless. Most solvents are harmless.
PPE Polyphenylene Ether 80 (176) Alcohol is harmless if applied only for short time in small amounts (e.g., quick wiping to remove grease). Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
PPF Composite Reinforced Polypropylene 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PPO Modified Polyphenylene Oxide 100 (212) Alcohol is harmless. Gasoline is harmless if applied only for quick wiping to remove grease.
PS Polystyrene 60 (140) Alcohol and gasoline are harmless if applied only for short time in small amounts. Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
PUR Polyurethane 80 (176) Alcohol is harmless if applied only for very short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
PVC Polyvinylchloride (Vinyl) 80 (176) Alcohol and gasoline are harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
SAN Styrene Acrylonitrile 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
TPE Thermoplastic Elastomer 80 (176) Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. Most solvents are harmless but avoid dipping in gasoline, solvents, etc.
TPO Thermoplastic Olefine 80 (176) Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. Most solvents are harmless but avoid dipping in gasoline, solvents, etc.
TPU Thermoplastic Polyurethane 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
TSOP TOYOTA Super Olefine Polymer 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
UP Unsaturated Polyester 110 (233) Alcohol and gasoline are harmless. Avoid alkali.

*The heat resistant temperature means a temperature that may cause heat deformation during a procedure.



THE PLASTIC BODY PARTS MATERIAL LIST


K125683C02
2.75,5.656 2.552,6.667 2.552,6.667 2.74,6.667 false 1.156,5.635 0.573,7.906 0.573,7.906 1.125,7.906 false 1.438,5.115 0.917,7.604 0.917,7.604 1.167,7.604 false 1.5,5.646 1.208,7.156 1.208,7.156 1.396,7.156 false 3.135,5.073 2.896,6.281 2.896,6.281 3.083,6.281 false 3.427,5.417 3.313,6.01 3.313,6.01 3.5,6.01 false 5.594,4.24 5.927,5.708 5.927,5.708 5.292,5.708 false 6.292,4.698 6.74,5.938 6.74,5.938 6.198,5.938 false 0.823,4.771 0.208,3.448 0.208,3.448 0.688,3.448 false 0.927,4.51 0.563,3.615 0.563,3.615 1.042,3.615 false 1.635,4.021 1.885,2.802 1.885,2.802 1.271,2.802 false 3.198,4.208 3.583,2.365 3.583,2.365 2.969,2.365 false 3.833,4.344 4.354,2.031 4.354,2.031 3.74,2.031 false 2.708,4.719 3.094,2.875 3.094,2.875 2.479,2.875 false 4.479,3.844 5,1.531 5,1.531 4.385,1.531 false 4.667,4.135 5.385,1.094 5.385,1.094 4.771,1.094 false 1.448,7.083 1.906,7.281 0.458,0.198 10 false *11 1.448,7.271 1.906,7.469 0.458,0.198 10 false *12 1.094,3.552 1.406,3.708 0.313,0.156 10 false *1 0.75,3.354 1.063,3.51 0.313,0.156 10 false *2 1.063,2.74 1.26,2.938 0.198,0.198 10 false *3 2.771,2.281 2.958,2.49 0.188,0.208 10 false *4 3.531,1.948 3.729,2.177 0.198,0.229 10 false *5 4.573,1.042 4.76,1.302 0.188,0.26 10 false *6 5.979,5.865 6.198,6.063 0.219,0.198 10 false *7 5.094,5.646 5.302,5.885 0.208,0.24 10 false *8 3.542,5.938 3.854,6.094 0.313,0.156 10 false *9 2.792,6.583 3.26,6.74 0.469,0.156 10 false *10 1.198,7.531 1.667,7.688 0.469,0.156 10 false *13 1.188,7.833 1.656,7.99 0.469,0.156 10 false *14 2.271,2.813 2.49,3.042 0.219,0.229 10 false *2 4.167,1.448 4.385,1.677 0.219,0.229 10 false *2 3.125,6.208 3.344,6.438 0.219,0.229 10 false *2
*1 Radiator Grille(ASA, ABS) *2 Emblem (ABS)
*3 Cowl Top Ventilator Louver (TSOP) *4 Outer Rear View Mirror (ASA/ABS/PA)
*5 Front Door Outside Handle (PA, PC/ABS) *6 Rear Door Outside Handle (PA, PC/PBT, ABS)
*7 Rear Body Mudguard (PP) *8 Fuel Opening Lid (PPO/PA)
*9 Side Step Plate Cover (PP/TSOP) *10 Front Body Mudguard (PP)
*11 Front Fog Light (PC) *12 Front Bumper Hole Cover (TSOP)
*13 Head Light (PC/PP) *14 Front Bumper (TSOP)


/ Made up of 2 or more kinds of materials.

, Resin material differs with model.


K125684C02
1.302,6.979 1.49,6.979 1.49,6.979 2.5,4.917 false 5.698,6.99 6.156,6.99 6.156,6.99 5.708,5.833 false 2.281,6.396 2.458,6.396 2.458,6.396 3.469,4.333 false 3.396,6.729 3.573,6.729 3.573,6.729 4.354,5.25 false 6.135,7.313 6.594,7.313 6.594,7.313 5.938,5.552 false 6.719,3.875 6.573,3.875 6.573,3.875 6.313,5.104 false 3.198,1.625 3.656,1.625 3.656,1.625 3.396,2.854 false 6.104,3.167 5.698,3.167 5.698,3.167 5.958,4.448 false 5.427,2.75 5.021,2.75 5.021,2.75 5.677,4.771 false 2.094,1.688 1.688,1.688 1.688,1.688 1.875,2.75 false 1.302,1.26 0.896,1.26 0.896,1.26 1.427,3.344 false 4.792,6.802 5.25,6.802 5.25,6.802 4.802,5.646 false 1.365,1.198 1.677,1.354 0.313,0.156 10 false *1 2.167,1.615 2.479,1.771 0.313,0.156 10 false *2 3,1.542 3.177,1.833 0.177,0.292 10 false *3 5.49,2.677 5.802,2.833 0.313,0.156 10 false *4 6.146,3.094 6.458,3.25 0.313,0.156 10 false *5 6.771,3.813 6.99,4 0.219,0.188 10 false *6 5.938,7.25 6.146,7.448 0.208,0.198 10 false *7 5.542,6.927 5.75,7.104 0.208,0.177 10 false *8 3.198,6.656 3.396,6.927 0.198,0.271 10 false *9 2.021,6.313 2.281,6.615 0.26,0.302 10 false *10 1.031,6.896 1.292,7.167 0.26,0.271 10 false *11 4.583,6.708 4.802,6.896 0.219,0.188 10 false *6
*1 Windshield Outside Moulding (PVC) *2 Roof Drip Side Moulding (TPO)
*3 High Mount Stop Light (PMMA/PC) *4 Tail Gate Handle (PC/PBT)
*5 Tail Gate Protector (PP/PE) *6 Emblem (ABS)
*7 License Plate Light (PC/PP) *8 Rear Bumper (TSOP/PP)
*9 Rear Combination Light (PMMA/ASA) *10 Rear Body Side Panel Protector (PP/PE)
*11 Side Panel Lower No.1 Moulding (PP) - -


/ Made up of 2 or more kinds of materials.