Home › Vehicle Exterior › BODY WELD POINT › ROOF PANEL(for Sliding Roof) › from 2016.08
BM27M0U _01 Vehicle Exterior _049435 BODY WELD POINT _0236703 ROOF PANEL(for Sliding Roof) F

BODY WELD POINT  ROOF PANEL(for Sliding Roof)  ASSEMBLY REPLACEMENT  


CrewMax


K125909

a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points

K125978C01
4.771,6.542 5.104,5.958 false 6.271,6.25 5.927,5.958 false 4.646,6.583 4.958,6.74 0.313,0.156 10 false *a 6.313,6.208 6.625,6.365 0.313,0.156 10 false *b
*a Disc Sander *b Hemming Location



b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back door opening frame.

HINT:

Apply just enough body sealer for the new parts to make contact.


3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K136833C01
5.208,5.75 5.583,5.333 false 4.167,5.833 4.5,6.198 false 4.031,5.646 4.344,5.802 0.313,0.156 10 false *a 5.667,5.25 5.979,5.406 0.313,0.156 10 false *b
*a Wooden Hammer *b Cloth Tape